氯碱企业快速熔断器运行状况调查报告

以2018年58家氯碱企业供电、整流技术与设备现状调查数据为依据,阐述了国内氯碱企业中快速熔断器的运行状况。调查数据中包括50家氯碱企业的快速熔断器的基本运行数据、投运时间及设备来源等。汇总了各企业在氯碱生产中使用快速熔断器时遇到的问题、发生的故障甚至酿成的生产事故及对氯碱生产造成的影响。并分析了事故发生的原因,提出了预防及解决措施,总结了事故处理经验,旨为氯碱生产提供参考依据。     

Morphology,thermal and mechanical performance of epoxy/polysulfone composites improved by curing with two different aromatic diamines

Epoxy/polysufone (PSF) composites cured with 4,4'-diaminodiphenyl sulfone (DDS) and 4,4'-diaminodiphenyl methane (DDM) were fabricated, and the effect of dual curing reaction of diamines with epoxy on morphology, mechanical, and thermal performance was investigated. DSC results indicated that DDM was more reactive than DDS and the activation energy decreased with the rising of DDM content. Structures with small domain size at the early stage of phase separation were fixed by the fast epoxy-DDM reaction. When the DDM content was elevated to a high level, large dual structures were changed to fine bicontinuous structures, which was favorable to improve the mechanical property. The mechanical performance of epoxy composites was enhanced and the maximum values were achieved when the DDM/DDS ratio was located at 75/25 (PSF/DDS0.25-DDM0.75). The flexural and tensile strength relative to epoxy/DDM system were enhanced more than those relative to epoxy/DDS, while the increase in toughness was the opposite. TGA measurement showed that thermal stability of epoxy/PSF composites was improved because of the restricting effect of continuous PSF domains on thermal motion of epoxy. DMA analysis exhibited two relaxation peaks for PSF/DDS0.25-DDM0.75, which could be attributed to the formation of phase separated morphology and epoxy network with different cross-link density.     

改进BP神经网络的再生粗骨料混凝土强度预测*

抗压强度作为评价再生混凝土主要性能指标之一,从四篇文献中搜集了43个抗压强度样本。基于改进的BP神经网络理论,建立了以再生粗骨料取代率、水灰比、龄期为输入,抗压强度为输出的神经网络模型,其结构形式为3-7-9-1。对该网络进行训练和学习,对并测试样本进行检测,结果表明,训练效率不仅大大提高,且而误差较小,并结合回归拟合系数,进一步表明该模型能够有效的的预测再生混凝土抗压强度值,能满足工程需要。     

Microstructural characterization of plasma sprayed Ln2Zr2O7 thermal barrier coatings by electron microscopy methods

The presented article characterized microstructural aspects of thermal barrier coatings (TBCs) analysis using methods of electron microscopy such as electron backscatter diffraction (EBSD), transmission/scanning electron microscopy (S/TEM), and TEM. The analyzed TBC system is based on gadolinium zirconate deposited by air plasma spraying method, and additionally, it was subjected to an oxidation test for 500 hr at a temperature of 1,100°C. Moreover, the morphological characterization of feedstock powder was showed. EBSD analysis revealed the inhomogeneity of feedstock materials in the form of complex phase composition. In the case of deposited coating, this method was used to characterize the crystallite size of zirconate coating and phase composition of thermally grown oxide zone. S/TEM and TEM analysis showed morphological details of this zone but not revealed such phase as perovskite oxide of GdAlO₃ type.     

某污水处理厂MBR膜系统改造与运行管理

某污水处理厂设计规模为10万t/d,采用AAO+MBR工艺,设计出水水质满足《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准。由于运行时间较长,MBR运行系统存在产能下降、膜丝断丝脱落、污堵和清洗频次以及强度增加等问题,严重影响正常生产运行。针对MBR系统运行中存在的问题,文中提出具体改造建议,并总结运行经验,进一步优化MBR膜系统的运行维护管理,为其他污水厂MBR膜系统运行问题提供解决思路和维护管理经验。     

Environmental economic dispatch in multi-area power system employing improved differential evolution with fuzzy selection

In a deregulated multi-area electrical power system the objective is to determine the most economical generation dispatch strategy that could satisfy the area load demands, the tie-line limits and other operating constraints. Usually, economic dispatch (ED) deals only with the cost minimization, but minimization of emission content has also become an equally important concern due to the mandatory requirement of pollution reduction for environmental protection. Environmental economic dispatch (EED) is a complex multi-objective optimization (MOO) problem with conflicting goals. Normally a fuzzy ranking is employed to rank the large number of Pareto solutions obtained after solving a MOO problem. But in this paper the preference of the decision maker (DM) is used to guide the search and to select the population for the next generation. An improved differential evolution (DE) method is proposed where the selection operation is modified to reduce the complexity of multi-attribute decision making with the help of a fuzzy framework. Solutions are assigned a fuzzy rank on the basis of their level of satisfaction for different objectives before the population selection and then the fuzzy rank is used to select and pass on better solutions to the next generation. A well distributed Pareto-front is obtained which presents a large number of alternate trade-off solutions for the power system operator. A momentum operation is also included to prevent stagnation and to create Pareto diversity. Studies are carried out on three test cases and results obtained are found to be better than some previous literature.     

大型球磨机订购（制造）设计联络中零部件结构优化的探讨

针对大型球磨机使用中存在的问题，对球磨机主要零部件结构缺陷进行分析并提出解决方案。通过设计联络，提前对球磨机主要零部件结构进行优化，消除设备缺陷。大型球磨机设计联络中对主要零部件结构进行优化，对提高球磨机的运转率有着事半功倍的作用。     

Morphology,structure, and photovoltaic properties of poly(3‐hexylthiophene) and [6,6]‐phenyl‐C61‐butyric acid methyl ester‐based ternary blends doping with polystyrene of different tacticities

The influence of the polystyrene of different tacticities on the morphology, phase structure, and photovoltaic properties of poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) blend has been extensively investigated. The atactic polystyrene (aPS) immiscible with P3HT tended to form the phase‐separated and columnar structure at low aPS weight ratio. Besides, the aPS could migrate to the surface of the films with PCBM phase distributing in the interfaces between P3HT and aPS domains at high aPS weight ratio of 75 wt %. The syndiotactic polystyrene (sPS) immiscible with P3HT could induce the crystallization of P3HT at low weight ratio of 3 wt %. The device based on aPS/P3HT/PCBM ternary blend showed of power conversion efficiency (PCE) of 1.2% even at aPS weight ratio of 50 wt %. However, the device based on sPS/P3HT/PCBM exhibited a sharp decrease in PCE value from 2.3% to 0.6% at sPS weight ratio of 3 wt %, due to the change in film morphology. The performance of the solar cell is believed to be determined by the morphology and phase structure of the ternary blends as revealed by the atomic force microscopy and UV‐vis spectra analysis. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41823.     

Development of a novel algorithm for optimal capacitor placement in distribution systems

Optimal capacitor placement in distribution systems solved by the hybrid method of CODEQ (called HCODEQ method) is proposed in this work. The concepts of chaotic search, opposition-based learning, and quantum mechanics are used in the CODEQ method to overcome the drawback of parameters selection in the differential evolution (DE). However, a larger population size must be used in the CODEQ method. That is a drawback for all evolutionary algorithms (EAs). To overcome this drawback, acceleration operation and migrating operation are embedded into the CODEQ method, i.e. HCODEQ method. The use of these two operations can increase the convergence speed without decreasing the diversity among individuals. One benchmark function and various-scale capacitor placement systems are used to compare the performance of the proposed method, CODEQ method, DE, simulated annealing (SA), and ant system (AS). Numerical results show that the performance of the HCODEQ method is better than the other methods.